Table of Contents
Advertisement
18.7.99
Operating more than one handset
Call allocation for incoming calls
Collective call group
Call group 1
Call group 1
Switching between collective call and ring priority
. t Service
x
REDIAL
kap16.fm5
It is possible to set how incoming calls should be signalled
when operating several handsets. A distinction is made
between:
Collective call (factory default) – incoming calls are
signalled to all registered handsets.
You can exclude individual handsets from the collec-
tive call group and reintegrate previously excluded
handsets.
Call group 2
Ring priority – incoming calls are first signalled at a
preferred (prioritised) handset. If this party does not
accept the call, the system automatically forwards it
to the handsets assigned to the collective call group
after an defined number of rings.
Call group 2
You can define which handset is assigned to the first
group and which are assigned to the second group.
Extensions that are not entered are excluded from
ring priority.
( t means: scroll with
Activate the "Service" menu item.
# 1
Start the setting procedure.
o
Enter the four-digit base code (factory default:"0000")
(
page 43).
: 2 3
The current setting is shown on the display:
:
*23 1
SET
1 u
Set collective call.
SET
or
2 u
Set ring priority.
SET
Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
Operating more than one handset
u
Z
, confirm with
(Example:1 = collective call
is set)
SET
REDIAL
x
OK
)
71
Advertisement
Table of Contents
