Table of Contents
Advertisement
18.7.99
Important basic settings
Analog trunks
Entering the analog trunk and the MSI
. t Service
x
REDIAL
48
kap09.fm5
For operating your Gigatset 2011 in a telephone system
for through connection to the public telephone network
you must set:
the analog trunk
the pause length after the analog trunk (if a pause is
necessary after entry of the analog trunk)
If the telephone system is connected as a subsystem to
a main system, you must set the:
the analog trunk
the MSI
the pause length after the analog trunk/MSI
For the pause length to be entered after the an-
alog trunk/MSI, please consult the documenta-
tion supplied with your telephone system.
The analog trunk and MSI have one to three characters
and can comprise the digits
R
and
keys.
( t means: scroll with
Activate the Service menu item
#@
Start the setting procedure.
Enter the four-digit base code (factory default: "0000")
o
(
page 43).
x
Select the analog trunk.
REDIAL
or
x
Select the MSI.
REDIAL
Enter the analog trunk or the MSI. If more than one ana-
o
log trunk or MSI is available, you can enter the next analog
trunk/MSI by pressing u
u
Save the setting.
SET
Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
@
6
to
u
Z
, confirm with
.
REDIAL
:
#
and the
,
,
x
OK
)
Advertisement
Table of Contents
