Table of Contents
Advertisement
4.0 COMMISSIONING
The MT5000 transmitter has been designed with a simple easy to follow setup menu. To make this unit operational,
at a minimum, the items in the BASIC SETUP menu must to be entered. If further setup is required, a Quick Calibra-
tion may be used or additional menu items will need to be entered.
4.1
Display Operation
When power is applied to an MT5000 series transmitter, the display will light up with a title screen which shows the
model type and the software revision. (Figure 4) This initial power up cycle will last for 3 seconds and the current
output of the transmitter will hold at 4.00 mA.
After the initial power up cycle, the display will change to show the Measured Level and the Current Output. The
output will also shift to the current corresponding to the level. (Figure 5)
By pushing the UP or Down button, the main display can be scrolled to display the level in terms of a percentage of
calibrated range (Figure 6) or in terms of a linearized / strapped measurement. (Figure 7).
MT5000-0200-1 Rev f (10-2010) DCN0528
Figure 6
Figure 4
Figure 5
Figure 7
8
Hide quick links:
Advertisement
Table of Contents
