Output; Lrv 4Ma; Urv 20Ma - K-TEK MT5000 Installation & Operation Manua

4.5.1. OUTPUT

OUTPUT is a function which allows the user to determine which variable the mA OUT-
PUT of the MT5000 will be based upon. Selections for OUTPUT are Level and LIN
Level. Level is the actual linear measurement the MT5000 is interpreting from its con-
figuration. LIN Level is the measurement of the MT5000 as it is filtered through the LIN-
EARIZATION TABLE (Section 4.6.4.)
To access the items in the mA OUTPUT SETUP menu from the main display:
1. Press and hold the SELECT button for 2 seconds.
2. Scroll UP or DOWN to the desired OUTPUT variable.
3. Press the SELECT button to set the new OUTPUT.
4. Scroll UP to END MENU.
5. Pressing the SELECT button now will return you to the main screen.

4.5.2. LRV 4mA

LRV 4mA is a value in engineering UNITS which determines at which measured value
the MT5000 will generate a mA OUTPUT of 4.00mA. Traditionally this is known as the
zero point. From the factory the LRV 4mA will be set to 0.00 inches.
To enter the LRV 4mA:
1. Press the SELECT button.
2. Scroll UP or DOWN to select each digit.
3. Press the SELECT button to set the digit and move to the next digit in sequence.
4. After the last digit is set, press the SELECT button to set the new LRV 4mA.
5. Scroll UP to END MENU.
6. Pressing the SELECT button now will return you to the main screen.

4.5.3. URV 20mA

URV 20mA is a value in engineering UNITS which determines at which measured value
the MT5000 will generate a mA OUTPUT of 20.00mA. Traditionally, this is known as the
span point. From the factory the URV 20mA will be set to the PROBE LENGTH.
To enter the URV 20mA:
1. Press the SELECT button.
2. Scroll UP or DOWN to select each digit.
3. Press the SELECT button to set the digit and move to the next digit in
sequence.
4. After the last digit is set, press the SELECT button to set the new URV
20mA.
5. Scroll UP to END MENU.
6. Pressing the SELECT button now will return you to the main screen.
MT5000-0200-1 Rev f (10-2010) DCN0528
OUTPUT
Level
mA
LVL: XX.XX in XX.XX
LRV 4mA
00.00 in
mA
LVL: XX.XX in XX.XX
URV 20mA
000.00 in
mA
LVL: XX.XX in XX.XX
19