Siemens SX66 User Manual page 117

Settings on your PC
Contact your ISP to get the
less Modem with a serial port
your PC first:
1. Click Start > Settings > Control Panel > Phone and Modem
2. Add a new modem by selecting the
3. Enable the checkbox
4. Select Standard Modem Types
Modem, then select Next.
5. Select your modem port and click
6. When a Modem installation is finished!
Modem tab mentioned in
modem list.
7. Highlight the modem you just created, click the
tab.
8. Enter the complete string in the
,"IP","APN","",0,0.
9. Remember to click the
string as mentioned above.
10.Click the General
list. Keep pressing
A new standard modem is now set up successfully on your PC, but you still need to create
a new dial-up connection:
1. Click Start > Settings > Control Panel > Network and Dial-up Connections > Make
New Connection.
2. To continue, tap
Dial-up to the
3. Select
4. Enable the option
through a local area network (LAN)
5. Select I connect through a phone line and a modem
6. Enable the
*99#, and then Next.
7. Enter the username and password you use to log on to your ISP, and then click
8. Enter a name for this connection, and then
9. Select No
then click
10.After the installation is completed, click Finish.
APN (Access Point
or IrDA connection, you need to create a new modem on
Don't detect my modem; I will select it from a
in the
Step 2. Now you can see a
Extra initialization commands:
Change Default Preferences
tab and set the
OK until the modem installation wizard exits.
Next.
Internet.
Tap
I want to set up my Internet connection
Use area code and dialing rules
when the installation wizard asks you to set up an Internet mail
Next.
SX66 Phone User Manual
Name). Before you start using your
Modem tab.
Manufacturers field, select
Next.
screen appears, click
Standard 33600 bps Modem
Properties button, and select the
button after entering the required
Flow Control by selecting
Next.
button, and Next.
option, and then
checkbox and enter the telephone number
Next.
Options.
list.
Standard 33600 bps
Finish to go back to the
Advanced
field: AT+CGDCONT=1
None from the drop-down
manually, or I want to connect
Next.
Next.
account,
117
Wire-
in the
and