Siemens SX66 User Manual page 113

To determine the communications port assigned to the
1. Tap the Bluetooth
> the Services
2. Select Serial Port
3. The Outbound COM Port
application that will use the
For more information about configuring your application's
the application's documentation.
Establish a serial connection:
1. Tap the Bluetooth
2. Tap New >
3. Follow the connection wizard instructions.
NOTE: Be sure that the
incoming connection requests. Please refer to the device's manual for more information.
Setting up a Bluetooth Hands-free/Headset connection:
1. From the
2. Tap New > Hands-free/Headset setup >
3. Follow the connection wizard instructions.
NOTE:
Be sure that the
incoming connection requests. Please refer to the device's manual for more information.
Setting up an ActiveSync via Bluetooth
You can set up an ActiveSync
need to set up the Bluetooth Configuration
user manual of your
To establish an ActiveSync
1. From the
2. Tap New > ActiveSync via Bluetooth >
3. Follow the connection wizard instructions. Be sure the
icon in the lower-right corner of the
tab.
from the services area, and then tap
is the lower listing on the screen. You must configure the
Bluetooth Serial Port
icon on the lower-right corner of
select Explore a Bluetooth device >
Hands-free
Today screen > the Bluetooth
Hands-free
device you are trying to connect to is ready to receive
partnership with a
Bluetooth device or PC), then set up your SX66 Phone.
connection on your SX66 Phone:
Today screen > tap the
SX66 Phone User Manual
Bluetooth
Today
Advanced.
to send data to this port.
Outbound COM
Today
Next.
device you are trying to connect to is ready to receive
icon > Bluetooth
Next.
Bluetooth-enabled
of your computer (follow the instruction in the
Bluetooth icon > Bluetooth
Next.
ActiveSync COM
serial port:
screen > Bluetooth Settings
port, refer to
screen > Bluetooth Manager.
Manager.
computer. First, you
Manager.
port setting on
113