Writing On The Screen - Siemens SX66 User Manual

54 SX66 User Manual
To select typed text,
want to select. You can cut, copy, and paste text by tapping
and holding the selected words, and then tapping an editing
command on the pop-up menu, or by tapping the command
Edit
on the menu.

2.3 Writing on the Screen

In any program that accepts writing, such as Notes, and
in the Notes
can use your stylus to write directly on the screen. Write
as you would on paper. You can edit and format what you
have written and convert the information into typed text at
a later time.
Tap the pen button
displays lines on the screen to help you write.
Some programs that accept writing may not have the pen
button. See the manual for each particular program to find
out how to switch to writing mode.
Selecting writing
If you want to edit or format writing, select the text first.
1. Tap
select the written text more easily.
2. Tap and hold the stylus next to the text you want to
select until the insertion point appears.
3. Without lifting, drag the stylus across the text you want
to select.
If you accidentally write on the screen, tap Edit, Undo, and
try again.
You can cut, copy, and paste written text in the same way
you work with typed text: tap and hold the selected words,
and then tap an editing command on the pop-up menu, or
tap the command on the
drag the stylus across the text you
tab in Calendar, Contacts, and Tasks, you
to switch to writing mode. This action
again to exit the writing mode. This helps to
Edit menu.
Tap the Pen button and use
your stylus like a pen