Starting Up - Siemens SX66 User Manual

2.1 Starting Up

Screen tapping and calibration
When you first start up your SX66, you will be asked to calibrate
the screen by tapping the center of a cross with your stylus as it
moves around the screen. This process ensures that when you
tap the screen with your stylus, the tapped item is activated.
Re-calibrate the screen
If your device does not accurately respond to screen taps, you
will need to re-calibrate it:
1. Tap the
Screen.
2. Tap the
calibrate the screen as described above.
When aligning the touch screen, tap the target firmly and ac-
curately.
Screen Orientation
To switch the orientation of your touch screen between the
Portrait mode or the
options by tapping
> Screen. The Portrait mode allows you to get a better view
or a better operation of certain programs on your SX66, while
Landscape may be optimal for viewing longer text files.
For easier reading of text in programs that support ClearType,
tap the ClearType
To increase readability or see more content by adjusting the size
of text in programs that support it, tap the
the slider to make text larger or smaller.
Start menu > Settings >
Align Screen button on the
Landscape mode, select the
the Start menu > Settings >
tab, and then select
the System tab
General tab to re-
Orientation
System tab
the
Enable ClearType.
Text Size tab. Move
SX66 User Manual
>
45