Allen-Bradley ControlNet 1786-RPFS Installation Instructions Manual page 3

If this product has the
the European Union and EEA regions. It has been designed and tested to
meet the following directives.
If this product is installed within the European Union or EEA regions
and has the CE mark, the following regulations apply.
EMC Directive
The module is tested to meet Council Directive 89/336 Electromagnetic
Compatibility (EMC) using a technical construction file and the
following standards, in whole or in part:
EN 50081-2 EMC – Generic Emission Standard,
Part 2 – Industrial Environment
EN 50082-2 EMC – Generic Immunity Standard,
Part 2 – Industrial Environment
The module described in this manual is intended for use in an
industrial environment.
Low Voltage Directive
The module is also designed to meet Council Directive 73/23 Low
Voltage, by applying the safety requirements of EN 61131–2
Programmable Controllers, Part 2 – Equipment Requirements and Tests.
For specific information that the above norm requires, see the
appropriate sections in this manual, as well as the following
Allen-Bradley publications:
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
Guidelines for Handling Lithium Batteries, publication AG-5.4
Automation Systems Catalog, publication B111
ControlNet Modular Repeater Short-distance Fiber Module 3
Î Î Î Î Î Î
mark, it is approved for installation within
Î Î
AB PLCs