VDO DTCO 4.0 Instruction Manual page 91

Second menu level – menu functions
IMPORTANT
If the card is removed on the ferry/train
and re-inserted, the entry Ferry/
train must be reset.
Set Local time
IMPORTANT
Firstly, familiarise yourself with the
chapter Time zones before you
make a change.
è Time zones [} 31]
entry
 vehicle
 vehicle
 local time
Fig. 105: Menu sequence entry - local time
© Continental Automotive GmbH
UTC 31.03.2018
23:32 01:32
23:32 01:02
23:32 00:32
Fig. 106: Menu sequence entry - entering local
time
For the standard display, you can adjust
the time to the local time zone as well as
to the start or end of the summer time.
The latter is carried out in steps of ± 30
minutes.
IMPORTANT
Please observe the legal requirements
applicable in your country.
Setting the company local time
In order to simplify the calculation of the
working times, the DTCO 4.0 provides a
working time counter which refers to the
local time of the company.
This information can be called up via the
front interface.
1. Select the following menu points:
entry
 vehicle
 vehicle
 company time
UTC 27.03.2018
23:44 01:44
Fig. 107: Menu sequence entry - local time
2. In step b, enter date and time of the
company headquarters as well as the
deviation to the UTC time.
Unlocking additional functions
By entering a licence code into the
DTCO 4.0, you can unlock additional
functions.
Menus
7
91