VDO DTCO 4.0 Instruction Manual page 89

Second menu level – menu functions
Changing settings to personal VDO
data
entry
 driver 1
 driver 1
? settings
? publish
VDO data
1 publish
ITS data? Yes
VDO data?
Fig. 101: Menu sequence entry - personal spe-
cial data
è Inserting driver card for the first time
[} 62]
© Continental Automotive GmbH
Activating remote control
entry
 driver 1
 driver 1
? settings
 driver 1
R enable remote
R enable remote
entries?
entries?
no
R1 Pair your
device
Fig. 102: Menu sequence entry - activating re-
mote control
Requirements:
®
• A DTCO SmartLink (option) is at-
tached to the tachograph.
• A Bluetooth-enabled device creates a
link to the DTCO
Proceed as follows to created a link
between the DTCO
terminal device:
1. The display of the DTCO 4.0 shows a
digit sequence (step e).
2. Insert this digit sequence into your
Bluetooth-enabled device.
Both devices are now linked and ready
for remote control.
IMPORTANT
Yes
When using the remote control, the
user is responsible for the legal com-
no
pleteness and correctness and recog-
nises this by using the remote control.
The use of the remote control is not
12345678
part of the legal tachograph system. It
is used on the operator's own respons-
ibility.
The periods during which a remote con-
trol was used, can be printed and dis-
played.
è Daily printout of the vehicle [} 116]
®
SmartLink.
Menus
7
®
SmartLink and your
89