VDO DTCO 4.0 Instruction Manual page 70

Operation by the contractor
6
Fig. 54: Requesting card (combination button)
Keep the combination button for card
drawer 1 or card drawer 2 pressed down
for at least 2 seconds.
2 Sped. Muster

Fig. 55: Transferring usage data
The name of the company is displayed.
A status bar displays the writing process
of the company card.
The request to deregister the company is
displayed.
70
 lock-out
company?
company?
Fig. 56: Deregistering the company on the
DTCO 4.0
1. Use the buttons /
No:
• The company is not dere-
gistered and the company lock re-
mains activated.
Yes:
• The company is dere-
gistered and the company lock is

deactivated.
Confirm using button .
IMPORTANT
Despite the deactivated company lock,
the saved data of your company remain
locked for any external companies.
IMPORTANT
A note is periodically displayed when a
No
periodic inspection of the DTCO 4.0 is
yes
due or the validity of the company card
is about to expire.
2. Remove your company card from the
card drawer.
to select:
è Removing company card [} 69]
The display shows:
Fig. 57: Standard display without cards
The DTCO 4.0 is once again in operating
Operation
mode
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
Removing company card
15:05  0km/h
 123456.7km 

, symbol .