VDO DTCO 4.0 Instruction Manual page 65

Functions of the company card
Operation by the contractor
■ Functions of the company
card
IMPORTANT
The purpose of the company card is
solely the data management of the
company, not the driving operation.
If you are driving with the company
card, the message ! Driving
without valid card
is displayed.
IMPORTANT
Observing the country requirements.
The company ensures the correct use
of the company cards.
• Please observe the legal require-
ments applicable in your country.
The company card is used by a company
to identify itself on the DTCO 4.0.
© Continental Automotive GmbH
The first time the company card is inser-
ted, the company registers on the
DTCO 4.0 so that it is run as the tacho-
graph of this company until it deregisters
or a different company card is inserted.
Thus, the access rights to the data as-
signed to the company will be ensured.
Within its entitlement level, the company
card offers the following possibilities:
• Registering and deregistering the
company on the DTCO 4.0, e.g. in
case of a vehicle sale, lease expiry
• Entering the member state and the
vehicle's registration number
è Inserting member state and vehicle
registration number [} 67]
• Accessing the mass memory data and
the data assigned to the company,
e.g. events, malfunctions, speed,
driver name
• Accessing the data on an inserted
driver card
• Accessing the front interface to auto-
matically download the mass memory
data
Operation by the contractor
In the EU, the data must be downloaded
every 3 months from the mass memory.
An addition, it is useful to download the
data in the following cases:
• Sale of the vehicle
• Immobilisation of the vehicle,
• Replacement of the DTCO 4.0
6
65