Advance acoustic LIGHTNESS 3 Manual page 36

Closing the reserve compartment and fitting the reserve
handle
The outer container is closed by the white closure loops and the two
yellow cables on the reserve handle. First lead the lower, longer yel-
low cable through the "buttonhole" of the reserve handle pocket
and further down its channel until it comes out of the harness .
Now fix the reserve handle in its pocket and then lead the upper, shor-
ter yellow cable to the side, out of the pocket by the red marking
. A magnet hold the reserve handle in position.
Put the reserve connection lines in their space at the side of the har-
ness .
Thread a short length of packing help line through the lower closure lo-
op and pull the ends of this line through its metal eyelet. Secure the lo-
wer end of the outer container with the lower, longer yellow cable
and stow the end in its channel.
Now completely open the side zip (which closes the V-connection side
channel). To do this, carefully pull the zip all the way down (wrong way
for opened zip) to the left hand side of the outer container . This is
the correct start of the zip track. Return the zip all the way back to the
shoulder end which will close the side channel . Stow the zip slider
in its "garage".
Caution: Do it with feeling - not strength!
36