Advance acoustic LIGHTNESS 3 Manual page 15

1 Your basic settings
All adjustments have markings for their basic setting. Always start
from these standard measurements when finding your own ideal po-
sition. Grey sewing indicates a basic setting for harness straps,
and black pen marks indicate standard speedbag line lengths. All
LIGHTNESS 3s are delivered at these basic settings.
First check that harness straps and speedbag lines are at their basic
setting marks. Harness pull-loop bases should line up with the grey se-
wing on the webbing, and speed bag length (lines to the footboard)
knots sit between the black marks (see pics. rt.). If necessary, correct
these positions before you start your own adjusting.
Put the LIGHTNESS 3 on, close the chest and leg straps with the
two-buckle clips, fasten the Closure Remember System and the
speedbag/cockpit and hang the harness in a harness stand by its
carabiners.
Tip: The harness stand support lines should approximately re-
present glider riser geometry.
Harness straps
Basic setting
Standard speedbag lines
Basic settings
Light speedbag lines
Basic settings
15