Table of Contents
Advertisement
76
Setup
Security
¢ m ¢
§Menu§
¢
Select a function
The phone and SIM card are pro-
tected against misuse by several
security codes.
Only
‚
(PIN2-protected)
Restricts dialing options to SIM-pro-
tected numbers in the Phonebook.
If only area codes are entered, rele-
vant phone numbers can be added
to these manually before dialing.
If the SIM card does not support PIN
2 input, the whole Phonebook can be
protected with the phone code.
Last 10 Only
(Phone-code protected)
Only phone numbers from the call
list of "dialed numbers" (p. 40) can
be dialed. This list can be filled with
phone numbers specifically for this
purpose.
First delete the call list, then create
"new entries" by dialing phone num-
bers and canceling before the con-
nection is established.
Security
b
b
¢ m ¢
§Menu§
¢
Select a function
Codes
PIN Control, Change PIN, Change PIN2,
Change Phonecode, (p. 22).
This SIM Only
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a
different SIM card, enter the phone
code when requested.
Barrings
Barring restricts the use of your
SIM card (not supported by all ser-
vice providers). You need a 4-digit
password which your service pro-
vider will give you. You may need to
be registered separately for each
barring.
All Outgoing
All outgoing calls, except emergency
calls, are blocked.
Outgo Internat
(Outgoing international):
Only domestic calls are possible.
Security
b
b
Advertisement
Table of Contents
