Table of Contents
Advertisement
¢ m ¢
§Menu§
¢
Select a function.
Headset
Only in conjunction with an original
Siemens headset (p. 95). If an
original Siemens Headset is used
the profile is automatically activated
when the headset is plugged in.
Auto Answer
(factory default: off)
Calls are accepted automatically
after a few seconds (except where
the ringer is switched off or set to
beep). You should therefore be
wearing the headset.
Eavesdropping is possible!
Automatic setting
Accept call with the Call key or PTT
key (Push To Talk) when the key lock
is activated.
Auto answer
If you do not notice that you phone has
accepted a call, there is the danger that
the caller may eavesdrop.
Call Forward
¢ m ¢
§Menu§
¢
Select a function.
You can set the conditions for which
calls are forwarded to your mailbox
or other numbers.
Call Setup
Call Forward
Set up call forwarding (example):
The most common condition for call
forwarding is, for example:
All Calls
Other calls are forwarded.
n
Symbol in the top line
of the display in standby
mode.
Unanswered
G
Select Unanswered.
(Includes the conditions
Not
Reachable,
Busy
Press.
§Select§
Select.
Set
J
Enter the phone number
to which the caller will be
forwarded (if not already
done)
Or
·
Select this phone number
from the Phonebook or
via §Mailbox§.
Confirm. After a short
§OK§
pause, the setting is con-
firmed by the network.
Setup
No
Reply,
see below)
71
b
b
Advertisement
Table of Contents
