Using The Camera With A Vtr - Sony DXC-327BK Operating Instructions Manual

Using the Camera with a VTR

When the DXC-327B/327BP is used with the CA-537/
537P, the following VTRs can be used with this
camera system.
Depending on the VTR connected to the camera, the
switch setting on the camera adaptor, the usable cable,
and the functions of the camera and the VTR vary.
(Please consult your local authorized Sony dealer if
you want to use a VTR other than those shown in the
table below.)
Setting of the VTR SELECT switch on the
CA-537/537P
Set the VTR SELECT switch on the CA-537/537P
depending on the VTR to be connected. If the setting
is not correct, video and audio signals may not be
recorded normally.
Setting of the VTR
Connected VTR SELECT switch
(Output video signal) output level
Sony
1 (Composite)
BVW-35/35P/50/50P
Sony
3 (Y/C)
VO-8800/8800PS
VHS format VTR
2 (Composite)
AG-6400 (Panasonic)
S-VHS format VTR
AG-7400 (Panasonic) 3 (Y/C)
JVC BR-S405
Notes
• When the VO-6800/6800PS portable VTR is
connected to the camera, set the –20 dB/–60 dB
camera microphone input selector on the VTR to –60
dB.
• When a CCU-M5/M5P/M7/M7P Camera Control
Unit is used, be sure to set the VTR SELECT switch
to "1".
Usable camera cables and power sources
Be sure to use the cable and AC power adaptor
appropriate to the connected VTR.
Connected Connecting Power supply AC power
VTR
VO-8800/
8800PS
AG-6400
(Panasonic)
AG-7400
(Panasonic)
Note
When the AG-6400/7400 is used, an independent
power source must be provided for the camera.
Setting of the
microphone
–60 dB
–60 dB
–20 dB
–20 dB
cable from the VTR adaptor for
to the camera the VTR
CCZQ-nA Yes
CCZJ-2 No
CCZQ-nA No
CMA-8A/8ACE
37