Adjusting The Sharpness Of The Picture - Sony DXC-327BK Operating Instructions Manual

Adjusting the Sharpness of the Picture

You can increase (harden) or decrease (soften) the
sharpness of the picture. Change the value of the detail
level to increase or decrease the sharpness. The detail
level can be set from –99 to +99 of the factory-set
reference level (00).
2
1
Press the DISP CHG switch several times until the
above display appears on the viewfinder.
2
Change the value of the detail level.
To increase the value: Press the UP/ON button
on the camera head.
To decrease the value: Press the DOWN/OFF
button on the camera head.
To reset the value to the reference level: Press
the UP/ON and DOWN/OFF buttons
simultaneously.
Note
If you increase the video output level when you
increase the detail level, the noise in the picture
increases.
UP/ON button,
DOWN/OFF button
1
DISP CHG switch
Flashes
A. IRIS
DETAIL
Detail level
M. PED
SHUTTER
Current setting
value
When using the RM-M7G
When the RM-M7G Camera Remote Control is
connected to the camera, the detail level can be
changed from the RM-M7G.
:
: 00
:
:
63