Sony DXC-327BK Operating Instructions Manual page 11

5 PRO 50-pin connector
Connect to the 50-pin connector of the camera adaptor
or EVV-9000/9000P, PVV-1/1P/1A/1AP/3/3P. (See
pages 22 to 24.)
6 Microphone holder attachment
Attach an optional CAC-12 microphone holder here.
(See page 29.)
7 Accessory shoe
Attach an optional accessory such as an DXF-40B/
40BCE, DXF-50B/50BCE viewfinder here.
8 Light receptacle
Attach an optional video light or other accessories
here.
9 Viewfinder attachment
Attach the DXF-601/601CE viewfinder here.
0 Built-in microphone
The built-in microphone allows you to make a sound
recording along with the video recording.
When an external microphone is connected to the MIC
IN connector on the CA-537/537P Camera Adaptor,
the built-in microphone does not function. We
recommend you use a uni-directional external
microphone to get a better sound recording when a
VTR such as a PVV-1/1P/1A/1AP/3/3P, EVV-9000/
9000P, is directly attached to this unit.
!¡ Lens mount
Attach the VCL-714BX Zoom Lens or another
lens and related equipment here.
!™ Cord clamps
Secure the viewfinder cord.
!£ LENS connector (6-pin)
Connect the lens cord when a
to the camera head using an LO-32BMT Lens Mount
Adaptor or when an MVA-40 Microscope Adaptor is
attached to the camera.
!¢ VF connector (8-pin)
Connect the viewfinder cord here.
!∞ REMOTE connector (10-pin)
To operate this camera from an RM-M7G Camera
Remote Control Unit, connect the camera to the
remote control unit via this connector. Make sure the
CAMERA SELECT switch on the bottom of the RM-
M7G is set to "1", the factory preset position.
!§ VIDEO OUT (output) connector (BNC type)
To check the picture of the camera you are shooting,
connect to the input connector of a video monitor.
Also you can connect to the video input of a VTR.
Title characters display on the viewfinder screen
output from this connector.
1
/ "
2
2
/ -inch lens is attached
3
11