Sony DXC-327BK Operating Instructions Manual page 9

1 POWER switch
OFF: Turns the camera off.
ON SAVE: Select to save power. When you press the
VTR start button, there is a delay before recording
starts, but the amount of power consumed in this
mode is less than when the VTR is in stand-by
mode (STBY).
This function is activated only when the VTR has
the power saving function.
ON STBY: Select for a quick start. When you press
the VTR start button, recording starts immediately.
In this mode, power continues to be consumed
while the drum heads rotate.
2 ZEBRA switch
ON: Select to display the zebra pattern on the
viewfinder screen for manual iris adjustment. The
zebra pattern appears in the picture where the
video level is about 70 to 80% IRE (for NTSC) or
about 490 to 560 mV (for PAL). (See page 64.)
OFF: Select not to display the zebra pattern.
3 VF MARKER (viewfinder safety zone marker
and/or center marker) selector
Use this selector to display the safety zone marker and/
or center marker on the viewfinder screen.
OFF: Indicates neither of the markers.
1: Indicates the safety zone marker.
2: Indicates both of the markers.
4 DISP CHG (display change) switch
Push this switch to change the character display mode
of the viewfinder screen. (See page 49.)
9