Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HDTV Supply HDM-B44C
Summary of Contents for HDTV Supply HDM-B44C
- Page 1 4K60 HDMI Matrix 4x4 VER 1.0...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electri- cal spikes, surges, electric shook, lighting strikes, etc. -
Page 3: Introduction
1. Introduction The 4×4 HDMI 2.0 Matrix simultaneously routes four HDMI sources to four HDMI displays. It supports the transmission of video resolution up to 4K×2K@60Hz Ultra HD YUV4:4:4 and supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio. -
Page 4: Specifications
4. Specifications Technical Video Bandwidth 600MHz(18Gbps) 480i, 576i, 480p, 576p, 720p, 1080i, 1080p24/25/ Video Resolution 30/50/60, 2160P24/25/30/50/60 4×HDMI, 1×RS-232 Input Ports Output Ports 4×HDMI Type A 19 pin female HDMI connector Human-body Model: ±8kV (Air-gap discharge), ESD Protection ±4kV (Contact discharge) Power Supply 12V/2.5A DC (US/EU standards, CE/FCC/UL certified) 150mm(W)×111mm(D)×32.2 mm(H) -
Page 5: Operation Controls And Functions
5. Operation Controls and Functions 5.1 Front Panel P O WE R O UT A O UT B O UT C O UT D Number Name Function description When the LED light is on, it is displayed as standby. When the LED light is not on, it is the equipment is working. - Page 6 Notice: The following is the EDID schema table. EDID mode EDID description 0000 1080p, Stereo Audio 2.0 1080p, Dolby/DTS 5.1 0001 1080p, HD Audio 7.1 0010 0011 1080i, Stereo Audio 2.0 0100 1080i, Dolby/DTS 5.1 0101 1080i, HD Audio 7.1 0110 3D, Stereo Audio 2.0 0111...
-
Page 7: Remote Controller
6. Remote Control ① Press this button to open the power of the Matrix or set it as a standby state. Output A ② Press these keys to select the Output A, Output B, Output C, Output D for output corresponding 1, 2, 3, 4 input port. - Page 8 General page ① Select the RS-232 COM port. ② Click to connect the matrix, no click will not connect the matrix. ③ Click reset to factory settings state. ④ Click to restart the matrix. ⑤ Select‘Enable Beep’, the matrix button sound open. No select and the sound is off.
- Page 9 EDID page The controller have 3 ways to set theEDID mode:‘manual mode’,‘Copy mode’and ‘Open EDID file mode’. ① Select the need EDID for the input, then click the‘set’button. EDID will be selected to HDMI input. ② Copy selected HDMI input or HDBT output EDID, then click‘set’button to select HDMI input.
- Page 10 Matrix page ① LED which display Input number for respective Output. ② Click to select Input port for respective Output port. ③ Click to select the previous or the next Input port for respective Output port. 9/11...
- Page 11 Upgrade page ① Click to open FW file(file extension is “.fw”). ② Display the FW file path. ③ Display the progress of the software upgrade. ④ Click to upgrade the Matrix software. ⑤ Display the message of the software upgrade. 10/11...
-
Page 12: Application Example
8. Application Example UHDTV UHDTV UHDTV UHDTV HDMI HDMI HDMI HDMI 1 1 1 1 OUT A OUT B OUT C OUT D 0 0 0 0 E DID DC 1 2V I N 1 I N 2 I N 3 I N 4 R S - 232 Power Supply...