1. Manuals
  2. Brands
  3. HDTV Supply Manuals
  4. Matrix Switcher
  5. MX04HE1
  6. Operating instructions manual

HDTV Supply MX04HE1 Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MX04HE1
.:
Model No
Operating Instructions
Thanks for purchasing our product.
Please be sure to read this instruction manual
Carefully before using our product.

Advertisement

Table of Contents
loading

Related Manuals for HDTV Supply MX04HE1

Summary of Contents for HDTV Supply MX04HE1

  • Page 1 MX04HE1 Model No Operating Instructions Thanks for purchasing our product. Please be sure to read this instruction manual Carefully before using our product.
  • Page 2 HDCP or not. Extra infrared receiver extension, IR emitter, RS232 and Ethernet port are supplied for remote control. MX04HE1 has the ability of equalization and amplification to ensure HDMI signal's transmission through long cable without quality loss. MX04HE1 offers solutions for digital entertainment center, HDTV retail and...

  • Page 3: Table Of Contents

    Contents HDMI Matrix ..................... 1 Product Overview .................... 1 Features ......................1 Package Contents.................... 3 Panel Descriptions ................... 3 Front Panel ...................... 3 Back Panel ....................... 4 Installation ......................4 Operation ......................5 Specifications ....................16 Typical Application ..................17 Maintenance ....................

  • Page 5: Hdmi Matrix

    HDMI Matrix (Router Type) Product Overview ■ (Model Number: MX04HE1) Features ■ Easy to use, install in seconds. Allows up to four HDMI audio/video devices to be independently switched to four HDMI monitors, HDTV’s, or projectors. The four outputs could show the same or different source simultaneously no matter the source is HDCP or not.
  • Page 6 Notice Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. Warning To reduce the risk of fire, electric shock or product damage: 1. Do not expose this apparatus 6. Clean this apparatus to rain, moisture, dripping or only with dry cloth.

  • Page 7: Package Contents

    ④ 1x IR extension cable (38 KHz IR receiver cable, connect to IR Ext sockets of MX04HE1). ⑤ 4x IR emitter cable (connect to IR emitter sockets of MX04HE1). ⑥ 4x IR receiver cable (from 30 KHz to 56 KHz IR receiver cable, connect to IR receiver sockets of MX04HE1).

  • Page 8: Back Panel

    HD-LCD, HD-DLP) into MX04HE1. ③ Use the HDMI cable to connect local HDMI sink device ( near to the matrix) to MX04HE1. Use UTP cable to connect remote HDMI sink devices to MX04HE1. ④ Power on the input source you want to show.

  • Page 9: Operation

    ⑤ Connect the power supply into MX04HE1 and turn on the display you want to watch. ⑥ Use remote or push the button to choose input source. Extra infrared receiver extension, IR emitter, RS232 port and Ethernet are supplied for remote control.
  • Page 10 User can use the IR receiver cable to change the IR receiver position. If controlling the MX04HE1 through the 1/8” (3.5 mm) input jack on the rear panel, connect the IR cable directly to the matrix rear IR Ext socket.
  • Page 11 4. IR call back control the matrix User can control the matrix via the IR call back system. This function can be disabled or enabled. Enable the function: press the output2 selection button and the output4 selection button at the same time for about 3 seconds. After all the output1 LEDs and the output2 LEDs flash once, the function is enabled.
  • Page 12 The matrix can not only extend the HDMI signal to HDMI receiver which is in remote rooms, but also can pass the IR signal through the IR system to the HDMI source or pass the IR signal from the HDMI source to the HDMI sink. There are four IR emitter sockets for connecting IR TX cable.
  • Page 13 6. RS232 remote control. 1. The Message Window 2.1 Receive Window The “receive window” will show the message received from MX04HE1. When you click the Control Buttons ( see step 4) or send Control Command ( see 2.3) to MX04HE1, it will send out the message about “operation results”...
  • Page 14 2.2 Status Button Click this button to read the status of MX04HE1. The status is about which input is selected by the output. 2.3 Send Window Input the control command in this window. The control command use ASCII. 2.4 Set IP Button Click this button to set IP address for nettle.
  • Page 15 2.5 IR Matrix In this menu, you can select the IR TX channel. Click this button to write the codes onto the device. 3 The Com Status 3.1 connect state. Connect state shows the com open or not. If it is open, the state is green. Otherwise, the state is red.

  • Page 16: Lan Control

    7. LAN Control. Note: Use the direct UTP cable to connect with PC, or use cross cable to connect to the Ethernet switcher A. When NETCTL run on PC at the first time, it will create a file ‘NETCTL.TXT’. This file is for device information’s backup.
  • Page 17 The right area is for device controlling. Click these buttons to control the device. It is the same as using the COM controller. The left area shows which input ports are being chosen by the output ports. C. When ‘Assign IP’ is displayed, it means that the device has not been assigned IP automatically.
  • Page 18 Click OK after assign the new IP and to return to the previous dialog. Click . The device can be displayed correctly. ATTENTION：here assign IP is different from Set IP in COMCTL. Set IP in COMCTL is save the IP address in flash, when the MX0404 power on, it will read the IP from flash and set it as static IP. Assign IP function used when automatically obtain IP address failed.
  • Page 19 Note3: The matrix will use the embedded 1080p-stereo EDID when the DIP switch is in this mode. The EDID will be 1080p video and stereo audio. The EDID data will only be updated when powering on the matrix. Note4: The matrix will use the embedded 1080i-stereo EDID when the DIP switch is in this mode.

  • Page 20: Specifications

    Below is the diagram for the some usage examples. NOTE: Please insert or extract cables gently. Specifications ■ Operating Temperature Range -5 to +35°C (-41 to +95 °F) Operating Humidity Range 5 to 90 % RH (no condensation) Input Video Signal 0.5-1.0 volts p-p Input DDC Signal 5 volts p-p (TTL)

  • Page 22: Maintenance

    Maintenance ■ Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit. ■ Product Service ● Provided Service Damage Requiring service: The unit should be serviced by qualified service personnel if: The DC power supply cord or AC adaptor has been damaged;...

  • Page 23: Warranty

    purchase, amount paid and place of purchase. Customer will be charged for the repair of any unit received without such proof of purchase. ● Warranty If your product does not work properly because of a defect in materials or workmanship, Grandbeing Company (referred to as “the warrantor”) will, for the length of the period indicated as below, （Parts (1) Year, Labor(90) Days）...
  • Page 24 There are no express warranties except as listed under “limited warranty coverage”. The warrantor is not liable for incidental or consequential damages resulting from the use of this product, or arising out of any breach of this warranty. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service location, loss of or damage to media or images, data or other recorded content.
  • Page 25 Address: Fax: www.

Table of Contents