Related Manuals for HDTV Supply HDTVMT0404VL1
Summary of Contents for HDTV Supply HDTVMT0404VL1
- Page 1 HDTVMT0404VL1 User Manual HDTVMT0404VL1 User Manual Contact: support@hdtvsupply.com 1 ...
- Page 2 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
-
Page 3: Table Of Contents
Table of Contents Introduction.....................4 Features.....................4 Panel Descriptions......................4 Remote Control Descriptions...................7 Application Diagram......................8 Specifications......................9 Package Contents..................9 RS-232 Pin Assignment..................10 GUI control....................10 10. DIP for EDID Setting....................20 11. Maintenance.........................20 12. Warranty Policy.......................21 13. Limitations of Warranty..................21 14. Exclusive Remedies..................22 15. RMA Policy...................22 ... -
Page 4: Introduction
Introduction The HDTVMT0404VL1 HDBaseT 4×4 Matrix for HDMI routes four Hi-Def sources to any four HDTV displays, supporting 1080p Full HD up to 4K plus all 3D formats, along with multichannel digital audio formats such as Dolby® True HD and DTS-HD® Master Audio™. - Page 5 2. IR receiver window----Receive the IR from the remote control of HDTVMT0404VL1. 3. Power LED indicator---Indicate the status of the power for the matrix. 4. Power button---Press to power on/off the matrix. 5. HDMI output selection button 1 to 4---Press to select the output from 1 to 4.
- Page 6 14. Selection button---Press to select segment to change setting. Selected segment will be blinking. 15. Down selection button---Press to change segment’s value. 16. Enter button--- Press to set EDID to specified INPUT or copy EDID from specified OUTPUT to specified INPUT. Back Panel 5.
-
Page 7: Remote Control Descriptions
Remote Control Description Output and Input select A. OUTPUT-X select INPUT-Y: 1. Press OUTPUT-X (X means 1 to 4 of outputs)Press INPUT-Y ( Y means 1 to 4 of inputs ) 2. Press OUTPUT-X (X means 1 to 4 of outputs) press the left and right arrow buttons to select the input. -
Page 8: Application Diagram
C. Mirror all inputs and outputs (Ex. Input 1 to output 1, input 2 to output 2, etc): Press PTP button in Zone OUTPUT EDID Set Up A. Fixed EDID to INPUT-Y/ALL Press 1080I/1080P/3D/4KPress 2.0CH/5.1CH/7.1CHINPUT-Y/ALL button in Zone INPUT B. Copy EDID of OUTPUT-X to INPUT-Y/ALL Press COPY buttonPress OUTPUT-X buttonPress INPUT-Y/ALL button C. -
Page 9: Specifications
Operating Temperature: -4°F to 140°F (-20°C to 60°C) Storage Temperature : Power Supply: 12V/5A DC (main), 12V/5A DC (POH) Package Contents: 1x HDTVMT0404VL1 2x 12V DC power supply 1x Remote control 4x IR Transmitter, 5x IR Receiver. 1x mounting kit. -
Page 10: Rs-232 Pin Assignment
HDTVMT0404VL1 RS-232 Pin Assignment Remote Control HDTVMT0404VL1 Console Assignment Assignment Baud Rate: 57600 bps Data Bit: 8-bit Parity: None Stop Bit: 1-bit Flow Control: None GUI Control PC System: Microsoft Windows Operation System Installation 4x4 HDMI Matrix controller is a green software. You just need to copy “4x4 HDMI Matrix Controller vx.x.exe”... - Page 11 HDTVMT0404VL1 Connect PC and Matrix by RS232 cable or UTP cable Power up Matrix (It will take about 5 seconds to be ready with “Di” beep sound ) Double click “4x4 HDMI Matrix Controller vx.x.exe” icon to run it How to control Matrix...
- Page 12 automatically before control commands sending ) ⑨ ⑦ Click to refresh device status: include device information displayed in area and ⑩ Input/output port connection status in area. NOTE: Tab pages cannot be changed during control command is processing. ⑧ To enable or disable Input/output tags displaying when setting buttons on “Setting” page focused ⑨...
- Page 13 ⑥ Click to Close the window and configuration cancelled “Port Tag” page ① Input port tags ② Click to edit Input port tags ③ Output port tags ④ Click to edit Output port tags NOTE: Edit boxes are read only, click “Edit” button to pop up window to edit the tags. One set of Input/output port tags can be set for Matrix device when COM control mode selected.
- Page 14 Edit Input port tags ② After action of , edit form will pop-up as below: Define tags for respective Input port, then devices connect the Input ports can be easily remembered. Click buttons with “×” caption to delete tag which is no use any more, if tag is still used by any other Input port, delete action will be discarded.
- Page 15 Click buttons with “×” caption to delete tag which is no use any more, if tag is still used by any other Output port, delete action will be discarded. “Setting” page ① LED which displays Input number for respective Output port ②...
- Page 16 Pop-up tag messages When “Display Input, Output tags when focus setting buttons” checkbox on “General” page is checked and Input/output port tag has been defined, tag messages will pop up like as: Pop-up Menu ② When mouse moves over setting buttons, and click mouse right button, menu will pop up like as: ...
- Page 17 All Outputs: All Outputs from same Input “1 Output” to “4 Outputs”: Set current Output (where mouse right clicked) and the next x-1 ( x range is from 1 to 4, set total x Outputs at the same time ) Output(s) from same Input Port to Port: Output1 from Input1, Output2 from Input2, Output3 from Input3, etc.
- Page 18 “EDID control” page ① Set EDID mode for selected Input port or All Input ports, click “Set” button to complete action. NOTE: When set User1/User2 EDID mode, should Download EDID content to User1 Memory/User2 Memory first. User1/User2 default EDID content is 1080p, Stereo Audio 2.0.
- Page 19 “IR Configuration” page To enable or disable IR control function. When box checked, IR control function enabled, otherwise, IR control function disabled. This setting is not memorized. IR control function is always enabled after power up. “FW upgrade” page ...
-
Page 20: Dip For Edid Setting
① Click to open firmware file (file extension is “.fw”). ② Firmware upgrade progress ③ Click the button to upgrade firmware. NOTE: If failure occurs during upgrading firmware process, the following steps SHOULD be done sequentially to establish next upgrading procedure: Power down the Matrix Close the 4x4 HDMI Matrix Controller Re-power up the Matrix, then wait for 10 seconds to ensure the Matrix is ready...