HDTV Supply HDM-B44C User Manual page 8

General page
1
3
4
5
① Select the RS-232 COM port.
② Click to connect the matrix, no click will not connect the matrix.
③ Click reset to factory settings state.
④ Click to restart the matrix.
⑤ Select'Enable Beep', the matrix button sound open. No select and the
sound is off.
⑥ The matrix has been selected'Power on'at work, When the user is
deselected and the matrix will go in standby mode.
⑦ Click refresh device status.
⑧ Click to clear device information.
⑨ Device information display column.
2
6
7/11
9
7
8