Advertisement
Quick Links
Advertisement
Related Manuals for Charge Amps RAY 1P 16A T1
Summary of Contents for Charge Amps RAY 1P 16A T1
- Page 1 Product Manual Produktmanual...
- Page 2 ENG/SE Technical Specifications/ Tekniska Specifikationer Type/Typ 1 Type/Typ 2 Description/ RAY 1P 16A T1 RAY 1P 16A T2 Beskrivning 100312 100310 Product number/ Produkt nummer 62196-2 (IEC Type 2) SAE J1772 (IEC Type 1) Vehicle interface/ Standard mot bilen Voltage/Nätspänning 220-240 V Frequency/Nätfrekvens...
- Page 3 User Guide READ SAFETY PRECAUTIONS BEFORE USE Charging Current You should always have good knowledge about the electrical installation before you start charging to make sure the installation handles the load correctly. Charging with high current requires that the outlet is rated for the load continuously and that the cable dimensions between the electric central and the outlet are of adequate size.
- Page 4 Användarmanual LÄS SÄKERHETSFÖRESKRIFTERNA INNAN ANVÄNDNING Laddström Du bör alltid ha god kunskap gällande den elektriska installationen innan du startar laddningen för att försäkra dig att installationen kan hantera laddlasten korrekt. Laddning med hög ström kräver att uttaget är klassat för en kontinuerlig last och att kabeldimensionen mellan elcentralen och uttaget är av adekvat dimension.
-
Page 5: Safety Precautions
Safety precautions Warning Due to mishandling a dangerous condition might occur such as electric shock or fire. • Before you connect the RAY make sure the correct charging current is selected. You must ensure that the outlet and circuit have enough current capacity to charge your vehicle safely. - Page 6 Charge Amps AB is not responsible for damages, either direct or indirect, relating to the use of these instructions. Charge Amps AB cannot guarantee completeness, accuracy or timeliness of the information found in this manual, and we reserve the right to make changes at any time without notice.