Anode Cap; Warning On Power Connection - Sony PVM-9L1 Service Manual

1-3-9. Anode Cap

n
Short-circuit the anode of the picture tube and the anode cap to the metal chassis, picture tube shield or carbon painted on
the picture tube, after removing the anode.
. . . . . Removal Procedure
a
a
(1) Turn up one side of the rubber cap in the
direction indicated by arrow a.
. . . . . Handling Precautions
(1) Do not scratch the surface of anode cap with a sharp object.
(2) Do not press the rubber so hard that it damages the inside of
anode caps. A shatter-hook terminal is built into the rubber.
(3) Do not turn the foot of the rubber over.
The shatter-hook terminal will stick out or damage the rubber.

1-4. Warning on Power Connection

Use a proper power cord for your local power supply.
Plug type
Female end
Cord type
Minimum cord set rating
Safety approval
a) Note : Use an appropriate rating plug which is applied to local regulations.
1-6
b
(2) Using a thumb, pull up the rubber cap
firmly in the direction indicated by
arrow b.
United State, Canada
LP-30B
LS-13
SB-SVT
10A/125V
UL/CSA
b
Europe
a)
––
VM0303B
H05VV-F
10A/250V
SEMKO, NEMKO, DEMKO, SEV,
KEMA, EI (FIMKO), CEBEC, VDE, BS
c
Anode button
(3) When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up the rubber cap and pulling up it in
the direction of the arrow c.
Japan
YP332
YC-35
VCTF
7A/125V
DENAN-HO
PVM-9L1