H, J And X Boards Removal (14 Inch); Removal Of Anode Cap (14 Inch) - Sony TRINITRON PVM-14L2 Service Manual

1-2-8. H, J and X Boards Removal (14 inch)

* Remove the picture tube beforehand.
6 H board
1 Tally cushion
2 X board

1-2-9. Removal of Anode Cap (14 inch)

n
Short-circuit the anode of the picture tube and the anode cap to the metal chassis, picture tube shield or carbon painted on
the picture tube, after removing the anode.
. . . . . Removal Procedure
a
a
(1) Turn up one side of the rubber cap in the
direction indicated by arrow a.
. . . . . Handling Precautions
(1) Do not scratch the surface of anode cap with a sharp object.
(2) Do not press the rubber so hard that it damages the inside of
anode caps. A shatter-hook terminal is built into the rubber.
(3) Do not turn the foot of the rubber over.
The shatter-hook terminal will stick out or damage the rubber.
PVM-14L2/20L2
5 Six screws
(+BVTP 3x12)
b
b
(2) Using a thumb, pull up the rubber cap
firmly in the direction indicated by
arrow b.
3 Two screws
(+BVTP 3x12)
4 J board
Bezel assy
c
Anode button
(3) When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up the rubber cap and pulling up it in
the direction of the arrow c.
1-7