Table of Contents
Advertisement
VB400 Vibration Platform
Care, Troubleshooting and Maintenance
To prevent electrical shock, switch off and unplug the machine before cleaning or performing
routine maintenance.
Cleaning and Maintenance
The machine can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents. Be
careful not to get excessive moisture on the control panel as this may damage it and create an electrical
hazard.
After each use, wipe the unit of any sweat, dirt or liquids.
Storage
Store the machine in a clean and dry indoor environment. Never leave or use the unit outdoors. Ensure the
master power switch is OFF ("O") and the power cord is un-plugged from wall outlet.
Troubleshooting
Problem
Machine will not start.
No console display.
Remote control not
functioning.
When to Call for Help
The vibration platform is designed with user safety as a priority. In the event of electrical failure, the machine
will shut off automatically to prevent injury and damage to the unit. If you encounter unusual behaviour from
the vibration platform, turn the power switch off and on to reset the machine. This should ready the machine
for normal operation again. If after you have reset the machine that it is still not operational, call an
authorized service center or technician for servicing.
E&OE
Potential Reason
A. Machine not plugged in.
No connection.
A. Remote control not aimed at
receiver.
B. Batteries.
©2017 Proflex
Correction
A. Plug power cord to electrical
outlet and switch ON.
Check electrical cables are in good
condition and properly connected.
A. Point the remote towards the
machine console when in use.
B. Use new batteries [2 x AAA size].
8
Hide quick links:
Advertisement
Table of Contents
