Manual Mode Training; Setting Session Duration - Proflex VB400 User Manual

VB400 Vibration Platform
Console/Remote
Control Function
Time - / T- (remote
control)
Time + / T+ (remote
control)
Speed - / S- (remote
control)
Speed + / S+ (remote
control)
Low (remote control)
Mid (remote control)
High (remote control)
P1 / P3 / P5 (remote
control)

Manual Mode Training

The machine has a "manual" mode of operation, which gives you the freedom to adjust the vibration platform
operation as desired at any time.
1. Switch the machine ON.
2. Press ON / OFF. The machine starts running at the slowest speed setting.
3. Adjust speed using the speed adjustment controls as required.
4. When finished, press ON / OFF.

Setting Session Duration

When training, the machine defaults the countdown timer to 10 minutes (this is the maximum timer value) to
a pre-set session duration, the machine stops automatically once the timer counts down to "00:00".
1. Switch the machine ON [but do not start it].
2. Press Time + / Time - as required. The current time in minutes is shown in the display. Duration can
range from 1 to 10 minutes.
3. Press ON / OFF.
4. When the timer finishes, the machine stops.
E&OE
Description
Press to reduce the countdown timer by 1 minute. Press and hold to quickly
decrease the timer. The timer has a maximum of 10 minutes. The machine
stops automatically once the countdown timer reaches "00:00". The current
countdown timer value is shown in the display. Not applicable in Program
mode.
Press to increase the countdown timer by 1 minute. Press and hold to quickly
increase the timer. The default timer has a maximum of 10 minutes. The
machine stops automatically once the countdown timer reaches "00:00". The
current countdown timer value is shown in the display. Not applicable in
Program mode.
When the machine is running, press to decrease vibration speed by a value of
1. Press and hold to quickly change speed. The speed range is 1 to 180. The
current speed setting is shown in the display. Not applicable in Program mode.
When the machine is running, press to increase vibration speed by a value of
1. Press and hold to quickly change speed. The speed range is 1 to 180. The
current speed setting is shown in the display. Not applicable in Program mode.
Press to set to speed 60.
Press to set to speed 120.
Press to set to speed 180.
Not used.
©2017 Proflex 5