Table of Contents
Advertisement
Vibration Platform Machine – VB100
Care, Troubleshooting and Maintenance
To prevent electrical shock, switch off and unplug the machine before cleaning or performing
routine maintenance.
Cleaning and Maintenance
The machine can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents. Be careful
not to get excessive moisture on the control panel as this may damage it and create an electrical hazard.
After each use, wipe the unit of any sweat, dirt or liquids.
Storage
Store the machine in a clean and dry indoor environment. Never leave or use the unit outdoors. Ensure the
master power switch is OFF ("O") and the power cord is un-plugged from wall outlet.
Troubleshooting
Problem
Machine will not start.
No console display.
Remote control not
functioning.
When to Call for Help
The vibration platform is designed with user safety as a priority. In the event of electrical failure, the machine will
shut off automatically to prevent injury and damage to the unit. If you encounter unusual behaviour from the
vibration platform, turn the power switch off and on to reset the machine. This should ready the machine for
normal operation again. If after you have reset the machine that it is still not operational, call an authorised
service centre or technician for servicing.
E&OE
Potential Reason
Machine not plugged in.
No connection.
A. Remote control not aimed at receiver.
B. Batteries.
© 2020 Proflex
Correction
Plug power cord to electrical outlet and
switch ON.
Check electrical cables are in good
condition and properly connected.
A. Point the remote towards the machine
console when in use.
B. Use new batteries [2 x AAA size].
12
Advertisement
Table of Contents
