Manual Mode Training - Proflex VB100 User Manual

Vibration Platform Machine – VB100
Console/Remote Control
Function
Display
ON / OFF (remote control)
PRG Mode / P (remote control)
Time- / T- (remote control)
Time + / T+ (remote control)
Speed- / S- (remote control)
Speed + / S+ (remote control)
P0-3 (remote control)
P4-6 (remote control)
P7-9 (remote control)
30 (remote control)
60 (remote control)
99 (remote control)

Manual Mode Training

The machine has a "manual" mode of operation, which gives you the freedom to adjust the vibration platform
operation as desired at any time.
1. Switch the machine ON.
2. Press ON / OFF. The machine starts running at the slowest speed setting.
3. Adjust speed using the speed adjustment controls as required.
4. When finished, press ON / OFF.
E&OE
Description
Shows various sessions information, such as remaining time, program mode (if
selected) and animation.
Press to switch the machine ON and OFF. Note that the main power switch [next to
the electrical lead] must be in the ON position.
When the machine is on but not running, press to enter Program mode. Press
repeatedly to step through programs. The current program number is shown in the
display.
Press to reduce the countdown timer by 1 minute. Press and hold to quickly decrease
the timer. The timer has a maximum of 10 minutes. The machine stops automatically
once the countdown timer reaches "00:00". The current countdown timer value is
shown in the display. Not applicable in Program mode.
Press to increase the countdown timer by 1 minute. Press and hold to quickly increase
the timer. The default timer has a maximum of 10 minutes. The machine stops
automatically once the countdown timer reaches "00:00". The current countdown timer
value is shown in the display. Not applicable in Program mode.
When the machine is running, press to decrease vibration speed by a value of 1.
Press and hold to quickly change speed. The speed range is 1 to 180. The current
speed setting is shown in the display. Not applicable in Program mode.
When the machine is running, press to increase vibration speed by a value of 1. Press
and hold to quickly change speed. The speed range is 1 to 180. The current speed
setting is shown in the display. Not applicable in Program mode.
Cycle between the P0, P1, P2 and P3 pre-set programs
Cycle between the P4, P5 and P6 pre-set programs
Cycle between the P7, P8 and P9 pre-set programs
Sets the machine to level 30 speed
Sets the machine to level 60 speed
Sets the machine to level 99 speed
© 2020 Proflex 9