Advertisement
4
Vision VE810 Engraver S5 Installation Guide
1
Introduction
This guide contains information to prepare the new owner of a Vision Express for the proper installation of
their machine. It is the customer's responsibility to read through this guide and make sure the work area,
electrical and computer requirements are met. If for any reason, there are questions about these
requirements, please call your Vision representative as soon as possible.
In the following sections, the complete machine and Vision software installation will be outlined.
Please call your distributor or the service department at Vision for assistance if you have any questions
with this procedure.
FOR MORE DETAILED INFORMATION, PLEASE REFER TO THE USER GUIDE FOR YOUR MACHINE
INSTALLED WITH THE VISION SOFTWARE. USER GUIDES ARE ALSO AVAILABLE ONLINE AT
http://www.visionengravers.com/support/vision-engraver-manuals.html
Important Note:
The Vision software is available in two versions; one with a dongle, and one
that is " dongle-less" and is loaded on to a USB Memory stick. If your machine
was delivered with, or you currently have the white/blue or orange software
dongle, DO NOT LOSE IT!
The Vision software will NOT run without the dongle plugged into the computer.
© 2018 Vision Engraving & Routing Systems
Advertisement
