Setting Up The At91Sam7A3-Ek Evaluation Board; Electrostatic Warning; Requirements - Atmel AT91SAM7A3-EK User Manual

2.1 Electrostatic
Warning
2.2

Requirements

AT91SAM7A3-EK Evaluation Board User Guide
Setting Up the AT91SAM7A3-EK
The AT91SAM7A3-EK evaluation board is shipped in a protective anti-static package.
The board must not be subjected to high electrostatic potentials. A grounding strap or
similar protective device should be worn when handling the board. Avoid touching the
component pins or any other metallic element.
In order to set up the AT91SAM7A3-EK evaluation board, the following items are
required:
! the AT91SAM7A3-EK evaluation board itself
! an A/B-type USB cable
or
! a DC USB power adapter (5V at 0.5 A) with USB A/B cable
Note: The AT91SAM7A3-EK is not delivered with a JTAG/ICE interface which is
required to start evaluating the device.
Section 2
Evaluation Board
6165C–ATARM–26-Jun-06
2-1