Kalfire W Series Installation And User Manual page 35

5.5.2 Igniting the Kalfire W70/33F, W85/40F,
W105/47F, W120/38F, W65/38C, W90/47C
and W90/47S
Place a couple of large logs on the base of the appliance and one
large log against the rear wall. Place two pieces diagonally on top.
Place some firelighters on the logs.
Ignite the firelighters using a long match. Leave the door slightly
open (1-2 cm) for a couple of minutes.
35
Place some finely chopped wood onto the logs. Open the air
regulation completely (position on the extreme right).
When there is a glowing bed, distribute the glowing ashes using
poker. Now add more wood (see section 5.6).