Jason.L Switch System Boardroom Installation Manual

Size: 3600mm x 1200mm

INSTALLATION GUIDE

Switch System

Boardroom

Size: 3600mm x 1200mm

Tools Required:

Power screwdriver.

Special Note: No pre-drilled holes or nut inserts are provided.

Wood screws will be required to be drilled directly into underside of desk top.

www.jasonl.com.au

Need help!

Call us on

1300 527 665

Page 1 of 5

Table of Contents

Do you have a question about the Switch System Boardroom and is the answer not in the manual?

Page 1 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on Boardroom 1300 527 665 Size: 3600mm x 1200mm Tools Required: Power screwdriver. Special Note: No pre-drilled holes or nut inserts are provided. Wood screws will be required to be drilled directly into underside of desk top. Page 1 of 5...
Page 2 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on Boardroom 1300 527 665 Size: 3600mm x 1200mm COMPONENTS Table Top x3 (1200x1200mm) Leg x8 Leg Bracket x8 Beam Bracket x16 Switch Beam x2 (1135mm) Switch Beam x4 (970mm) Switch Beam x4 (800mm) L-Bracket x20 SCREWS Hex Nut x8...
Page 3 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on Boardroom 1300 527 665 Size: 3600mm x 1200mm Join Leg Brackets to each Leg using screws to secure them, as follow. Join 2 L-Bracket through each 800mm Beam and 1 L-Bracket through each 1135mm and 970mm Beam. Securely connect each Beam to each Beam Bracket.
Page 4 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on Boardroom 1300 527 665 Size: 3600mm x 1200mm Position as presented, and proceed to screw For the 4 central legs, attach as presented, using T Beam Bracket. to ensure each corner of the frame. Page 4 of 5...
Page 5 www.jasonl.com.au INSTALLATION GUIDE Switch System Need help! Call us on Boardroom 1300 527 665 Size: 3600mm x 1200mm Directly screw into table tops, using L-Bracket screws through each L-Bracket. Page 5 of 5...