2.
WATER HEATER FRONT CASE REMOVAL
& REPLACEMENT OF COMPONENTS
WATER HWATER FRONT CASE REMOVAL
1. Remove the 4 retaining screws from the upper/underside
of the water heater.
2. Pull the caseforward from the water heater.
REPLACEMENT OF COMPONENTS
When replacing ANY component.
1. Isolate the electricity supply.
2. Turn off the gas supply.
3.
Turn off the cold water.
Remove the front case.
4.
After replacing ANY component, check operation of the water heater
including gas soundness, gas inlet pressure & outlet pressure.
IMPORTANT
When work is completed,
that a good sealing is made.
front case, must be correctly refitted-ensuring
seal
the
[SHW-30~33 Model]