Model C-6000 Series Command Center - Instructions - GAYLORD CG3 Series Technical Manual

MODEL C-6000 SERIES COMMAND CENTER - INSTRUCTIONS

General Description:
The C-6000 Command Center is designed to start and stop the
exhaust fan and wash up to 5 groups of ventilators in sequence
with a delay period between each group. A sequence wash may
be necessary if the building's hot water system is not capable
of supplying the required volume of water at one given time.
The exhaust fan and wash sequence may be started Manu-
ally by pushing the "Start Fan" or "Start Wash" buttons, or
may be programmed for Automatic operation.
Programmed operations may include:
1. Starting the exhaust fan once within a 24-hour period.
2. Stopping the exhaust fan and starting the wash cycle
sequence once within a 24-hour period
FIGURE 9
C-6000 COMMAND CENTER
3. Programming the length of the wash cycles and delay
periods between the wash cycles. The maximum length
of a wash cycle is 9 minutes. The maximum length of the
delay period is 99 minutes.
4. Skipping a day so the exhaust fan and wash cycle do not
operate for holidays or specific days within a 7-day week
when the kitchen is not operating.
The C-6000 Command Center provides information and pro-
gramming for various functions by accessing nine different menu
catagories. An overview of the nine menu items are as follows:
1. Service - Displays Gaylord's website address:
gaylordusa.com
2. Detergent - Displays Toll-Free Number to order deter-
gent:
3. Wash Length - Sets length of each wash cycle from 3 to
9 minutes
4. Delay Time (for sequence wash units only) - Sets delay
between washes from 1 minute to 99 minutes
5. Set Clock - Day, hour and minutes
6. AutoMode [M or A] - Sets the C-6000 to Manual or
Automatic modes. In Automatic mode, the C-6000 will
start the Fan and Wash at the preset times that were set
using the Set Wash Times option.
A = Automatic / M = Manual
Also allows individual days (Mon, Tues., etc.) to be set ON
or OFF when Automatic mode is selected.
7. Set Wash Times - Sets Start Times for Automatic start
of Fan and wash when C-6000 is set to Automatic mode.
8. Wash Test - Runs through a complete Wash Cycle with
decresed times
Damper Closing Time = 10 sec.
Wash Times = 10 sec.
Water Heating Time = 10 sec.
Exits menu when finished.
9. Number of Washes - Preset at factory and protected with
a password. Allows the number of washes to be changed
from 1 to 5 (S1 to S5).
Spanish (Español) Instructions:
The C-6000 Command Center has the ability to display its
commands and messages in either English or Spanish
(Español).
Press the "ENGLISH / ESPAÑOL" [F3] button to toggle the
language displayed from English to Spanish (Español) or from
Spanish (Español) to English.
NOTE: All messages displayed by pressing the "MENU"
[F4]button only appear in English. They will not appear in
Spanish (Español).
Using the Menu:
To Enter the Menu, press the MENU button [F4].
To navigate the Menu:
• Press [F1] to go to the Next menu item
• Press [F2] to go to the Previous menu item
14
800-286-2010