H3C S5130S-EI series Installation Manual page 69

Model
S5130S-28P-HPWR-EI
S5130S-28S-HPWR-EI
S5130S-28F-EI
S5130S-52F-EI
Table 21 GE SFP transceiver modules and cables
GE SFP
transceiver
module/cable
Copper SFP transceiver module
SFP-GE-T
Fiber SFP transceiver module
SFP-GE-SX-MM850
-A
SFP-GE-LX-SM131
0-A
SFP port support for SFP
transceiver modules and
cables
GE SFP transceiver modules and
cables in Table 21 and FE SFP
transceiver modules in
Central
Connector
wavelength
N/A RJ-45
850 nm LC
1310 nm LC
62
Restrictions
N/A
Make sure the ambient temperature does
not exceed 40°C (104°F) when the
following conditions are met:
•
The switch uses one or two
PSR75-12A power modules for
power supply.
•
The switch uses transceiver modules
with a maximum transmission
Table 22
distance greater than or equal to 80
km (49.71 miles)
Make sure the ambient temperature does
not exceed 40°C (104°F) when the
following conditions are met:
•
The switch uses one or two
PSR75-12A power modules for
power supply.
•
The switch uses transceiver modules.
Cable
specifications
Twisted pair
cable
50/125 µm
multi-mode
optical fiber
62.5/125 µm
multi-mode
optical fiber
9/125 µm
single-mode
optical fiber
50/125 µm
multi-mode
optical fiber
62.5/125 µm
multi-mode
optical fiber
Modal Max
bandwidth transmission
(MHz*km) distance
100 m (328.09
N/A
ft)
550 m (1804.46
500
ft)
500 m (1640.42
400
ft)
275 m (902.23
200
ft)
200 m (656.17
160
ft)
10 km (6.21
N/A
miles)
550 m (1804.46
500/400
ft)
550 m (1804.46
500
ft)