Sysrestart Screen - ZyXEL Communications PMG1005-T20B User Manual

6.4 SysRestart Screen

System restart allows you to reboot the GPON Device using the current settings or factory default
settings without turning the power off. Click Maintenance > SysRestart. Click RESTART to have the GPON
Device reboot. This does not affect the GPON Device's configuration.
Figure 14 Maintenance > SysRestart
The following table describes the labels in this screen.
Table 11 Maintenance > SysRestart
LABEL
System Restart
with
RESTART
Chapter 6 Maintenance
DESCRIPTION
Select Current Settings to keep your configuration settings after the GPON Device reboots. This
does not affect the GPON Device's configuration.
Select Factory Default Settings to clear all user-defined configuration information and return
the GPON Device to its factory defaults (LAN IP address 192.168.1.1, user name admin and
password 1234). To log in again you may have to change your computer's IP address, so that
it's in the same subnet as the GPON Device.
Click this to reboot the GPON Device.
PMG1005-T20B User's Guide
24