Led Status Indicators - Ixon IXrouter3 IX2400 Installation Manual

LED status indicators

The IXrouter3 has two LEDs for router status: one
signal LED (3G, 4G, Wi-Fi signal) and one activity LED.
The IXrouter3 requires approximately 2 minutes to
boot up and set up a secure connection.
Signal LED
Blinking blue
Blinking red 1 pulse
Blinking red 2 pulses
Blinking red 4 pulses
Constant red
Constant purple
Constant blue
Activity LED
Constant red
Blinking red 1 pulse
Blinking red 3 pulses
Blinking red 4 pulses
Blinking red 5 pulses
Blinking blue 1 pulse
Blinking blue 2 pulse
Constant blue
More info
For a list of most common causes and troubleshooting tips we recommend
viewing our online article:
Cloud enable your machines
Initializing cellular module
No reception or unable to connect to
network
(APN or SSID may be incorrect)
PIN invalid or PUK required
(a phone is required to unlock SIM card with
PUK)
SIM card is invalid or missing
Connected, poor reception
Connected, medium reception
Connected, good reception
Booting up (may take 1-2 min) or not yet
registered
Waiting for internet access
LAN/WAN conflict
(conflicting subnets)
Removed from the platform
(re-insert USB flash drive to register again)
Previously registered to the IXplatform
(remove from the IXplatform and register
again)
Connecting to the IXplatform
Setting up a VPN connection
Active VPN connection to the IXplatform
https://support.ixon.cloud/hc/articles/360002302011
14