Dust Collection - American Sanders EZ Sand-HDTR Operator's Manual

English - EN
This sanding machine is designed to be operated with a
remote vacuum dust collection system or with the included
dust bag.
Preparing Remote Vacuum Dust Collection Systems
To prepare the machine for remote vacuum dust
collection systems that have a 2" hose end, install 2"
hose end (Figure 5 - "A") directly over the exhaust tube
(Figure 5 - "B").
To prepare the machine for remote vacuum dust
collection systems that have a 1 ½" hose end, follow this
procedure:
1. Install the 2" x 1½" hose end adaptor (Part No.
30563A) (Figure 5 - "C") over the exhaust tube (Figure
5 - "B").
2. Insert 1 ½" hose end (Figure 5 - "D") into the adaptor
(Figure 5 - "C").
NOTE: Start the remote vacuum collection system
before operation.
Preparing to use the included dust bag
To prepare the machine for use with the included dust
bag (Part No: 53544C), follow this procedure:
1. Install the dust bag by pressing the end onto the
exhaust tube until the ring locks into the groove
(Figure 6).
2. To remove the dust bag from the exhaust tube, pry
up the end of the bag opening to partially release the
internal rib from the groove, then pull.
3. To empty the dust bag, unzip the disposal flap and
force contents out by inverting the bag.
NOTE: For best results, empty frequently. Follow all
warnings posted in this manual and on the dust bag.
WARNING:
Never leave sanding dust unattended!
DANGER:
Dust generated from sanding wood floors can
spontaneously ignite or explode. Promptly
dispose of any sanding dust in a metal container
clear of any combustibles. Do not dispose in a
fire.

Dust Collection

1.5" Hose From
Vacuum System
(Not Included)
A
2" Hose From
Vacuum System
(Not Included)
Figure 5
9
D
B
Exhaust Tube
Install the dust bag by
pressing the end onto the
exhaust tube until the ring
locks into the grove.
Section - A
C
(Part # 30563A)
2" Tube x 1.5"
Hose Adapter
(Not Included)
Figure 6