Safety Requirements - GE WSLP1500H0WW Technical Service Manual

GE Factory Service Employees are required to use safety glasses with side shields, safety gloves and
steel toe shoes for all repairs.
Steel Toed Work Boot
Cut Resistant Sleeve(s)
Prior to disassembly of the washer to access components, GE Factory
Service technicians are REQUIRED to follow the Lockout / Tagout
Step 1
Plan and Prepare
Step 2
Shut down the appliance
Step 3
Isolate the appliance

Safety Requirements

Electrically Rated Glove and
Dyneema® Cut Resistant
Glove Keeper
Plano Type Safety Glasses
Brazing Glasses
(LOTO) 6 Step Process:
Step 4
Apply LOTO device and lock
Step 5
Control (discharge) stored energy
Step 6
"Try It" verify that the appliance is
locked out
– 5 –
Dyneema®Cut Resistant
Glove
Prescription Safety Glasses
Safety Glasses must be ANSI
Z87.1-2003 compliant