Page 1
Safety Information ..... Operating Instructions Control and Indicator Settings ..5, 6 WSLS21 O0 Loading and Using the Washer ..7, 8 WSLPllO0 Special Washer Features ....Installation Instructions Alcove or Closet Installation ..Electrical Requirements ....Grounding Instructions ....
IMPORTANTSAFETYINFORMATION. READALL INSTRUCTIONSBEFORE USING. ] For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. WATER HEATER SAFETY Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more.
_. WHENNOTIN USE • Turn off water fimcets to relieve pressure • Do not attempt to repair or replace any part of hoses and valves and to minimize leakage this appliance tmless specifically recommended a break or rupture should...
Special washer features. Before starting the washer: • I,oad laundr_ in the washe_: • Add detergent tiff)tic sotiener to the dispenser drawe_: • Add bleach (if needed) to the bleach dispense_: Detergent and Fabric Softener Dispenser Drawer ToUse the Fabric SoftenerDispenser: -- Maximule detergent fir)tic...
Page 5
About the controland indicator settings, ge.com CLOTHES CARE CYCLE SELECTION TIME REMAINING • PRESOAK • EXTRA LARGE • COLORS • HOT/COLD NORMAL • WHITES • WARM/COLD WASH • LARGE • RINSE ONLY • MEDIUM • DELICATES • COLD/COLD • SPIN ONLY •...
Page 6
About the control and indicator settings. LOAD SIZE i,ooselv load clothes no higher than tile of holes in the washer basket. Tile water le',el should just co',er tile clothes. A(!iust tile load size accordingly. WASH CYCLE These wash cycles control tile length of tile washing...
Loadingand usingthe washer. Fabric CareLabels Below are thb_ic care label "svml)ols" that affect clothing _ou _dll be launde_ing. WASH LABELS wash cycle Normal p..t Press/ G entle'_/ Do not wasll Do notwring wrinkle resistant delicate Hand wash Water • •...
Installation Washer Instructions WSLS1100 WSLP1100 I ffyou have questions,call 800.GE.CARES or visit our Website at: ge.com BEFORE YOU BEGIN PLUMBING • WATER PRESSURF--Must be 10 p.s.i, milfilnmn Read these instructions completely and carefully. 150 p.s.i, maxilnmn dynalnic pressure measm'ed " IMPORTANT - S.ve hese...
Installation Instructions A CAUTION: Before plugging ill washer, read following electrical requirements. LEVELING THE WASHER-- ELECTRICAL REQUIREMENTS STATIONARY MODELS A CAUTION: personal safety, Before connecting tile hoses, tile washer must be lexel. not use an extension cord or adapter plug with this I exelino locks are located at tile bottom...
Page 11
Installation Instructions WASHER CONNECTIONS FOR STATIONARY MODEL WSLS1100 WARNING: Make sure washer is un )lugged [] FLUSH WATER LINES [] CONNECT DRAIN HOSE s()me water fl'om the hot cold fimcets to flush Fom_ a U shape on tile end of tile drain hose with tile...
Installation Instructions WASHER CONNECTIONS FOR STATIONARY MODEL WSLS1100 (CONT.) [] INSTALLATION CHECKLIST [] REMOVE THE PROTECTIVE FILM COVERING THE CONTROL PANEL Before starting the washer, check to make sure: Main power is turned The washer is plugged The water fimcets are turned The unit is level.
Page 13
Installation Instructions WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1100--ONE-FAUCET CONNECTIONS hose connector provided with washer [] CONNECT TO VALVE INLET one-t;i t/(et connection, TO CONNECT THE WASHER: Attach the COLD water supply connector to the COLD water valve inlet (color BI,UE). Make stlre the washer...
Page 14
Installation instructions WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1100mONE-FAUCET CONNECTIONS (CONT.) [] MAKE SURE THE TEMPERATURE [] REMOVE THE PROTECTIVE FILM COVERING THE CONTROL PANEL SELECTOR IS SET AT COLD/COLD [] SLOWLY TURN ON THE WATER FAUCET ALL THE WAY TO THE DESIRED TEMPERATURE SETTING [] INSTALLATION CHECKLIST...
Page 15
Installation Instructions TO DISCONNECT THE WASHER: [] TURN WATER FAUCET OFF [] DISCONNECT FROM WATER LINE Mo;e locking collar down pull hose cmmector down to disengage flx)m fimcet a dapter. LockingCollar HoseConnector I_UNPLUG POWER CORD AND RETURN IT TO THE STORAGE AREA [] DRAIN WATER Drain...
Page 16
Installation Instructions WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1100--TWO-FAUCET CONNECTIONS have tw() separate _3Jtei" connections_ washer }_O/I yO/lI" the hot and cold water faucets. can be connected to both [] PLUG THE POWER CORD INTO A This kit can be purchased fl'om your dealer or fl'om Parts 3-PRONG...
Before you call for service.., ge.com Troubleshooting Tips Save time and money! Review the charts on the following pages first and you may not need to call for service. Status Indicatots POWERON/OFFto • Press off the washer. • Call for service.
Page 18
Before you call for service... Troubleshooting Tips WATER POSSIBLE CAUSES WHAT TO DO Too many suds Type of detergent • Switch to a lower sudsing detergent brand and fi,llow instructions on package. Very soft water • T_a less detergent. Too much detergent •...
Page 19
OPERATION POSSIBLE CAUSES WHATTODO Washer pauses during washer normally pauses washcycle between washing steps Washer pauses during This is normal • The washer may pause during the spin cycle to remoxe spincycle more efficiently. soapy water Washerwon'toperate unplugged Washer •...
Page 20
Before you call for service... Troubleshooting Tips PERFORMANCE (cont'd) POSSIBLE CAUSES WHAT TO DO Snags, holes, team, rips Pins, snaps, hooks, sharp • Fasten snaps, hooL_, buttons and zippe_. or excessive wear buttons, belt buckles, • P.emove loose items like pins, objects in pockets zippers mad shm'p objects and shaq)
Page 21
GE Service Protection Plus rM GE, a name recognized worldwide for quality dependability, oflers Service Protection Plus'"--comprehensive protection on all yore appliances-- No Matter What Brand! Benefits Include: We'll CoverAny Appliance. . Backed by GE Anywhere.Anytime. . All brands covered...
C_III COllta{'[ VOII you require selMce. the unlikel_ e_ent of a service number sat_ 17,modificalion. 8(10 GE CARES (800-432-2737). Model Number Serial Number Important: If you did not get a registration card with your product, detach and return the form below to...
Page 23
Anypatt of the _z_sher which tifils due to a deii_ct in materials or workmanship. During this From the date of the limited one-year warranty, GE will also provide, free of charge, all labor and in-home service to origina/ purchase replace the defective part.
Page 24
ScheduleService ge.com Expert (;E repair setsice is onl) one step away fl'om xour door Get on-line and schedule your set\ice xour, conxenience 24 hours any (lax of tile year! Or call 800.GE.CARES (800.432.2737) during n{mnal business hours. RealLifeDesign Studio ge.com...
Need help?
Do you have a question about the WSLS1100 and is the answer not in the manual?
Questions and answers