Table of Contents
Advertisement
4.5.4
Legacy/ UEFI Boot Device
When you wish to set a designated boot device, you may set it as the first device to
boot in Legacy or UEFI Boot Device setting. Or if you wish to manually select a boot
device, you may do so by pressing F12 when the system boots up.
To set boot order for devices in UEFI Boot Device:
1.
When system boots up, press F2 to enter BIOS setup utility
2.
Go to [Boot] > [UEFI Boot Device]
3.
Highlight the device you wish to make boot order changes to and press F5/ F6
or +/ - to change device boot order.
To select boot order for devices in Legacy Boot Device:
1.
When system boots up, press F2 to enter BIOS setup utility
2.
Go to [Boot] > [Legacy Boot Device], you can choose the type of device to list
by selecting "By Device or By Device Type".
3.
Highlight the device you wish to make boot order changes to and press F5/ F6
or +/ - to change device boot order.
Nuvo-5501 Series
73
Advertisement
Table of Contents
Need help?
Do you have a question about the Nuvo-5501 Series and is the answer not in the manual?