Rentokil Connect AutoGate Instruction Manual page 4

Pest Connect Overview
Pest Connect is a system that enables remote monitoring of devices. Data from sensors is sent to
a Connect Control Panel which establishes a secure connection to a central server where the
data is passed to the Rentokil Systems.
Typical sensors that are used in the Pest Connect system are the Connect Radar mouse trap and
the AutoGate Connect, shown below in Figure 1.
A typical installation will have many sensors communicating to the Connect Control Panel and a
single control panel can manage up to 300 sensors. Where necessary multiple Control Panels
could be deployed onto a site and up to 8 co-located control panels are permitted. In such a
system if the sensors fail to connect to the Control Panel they will scan for alternative Control
Panels to ensure high levels of connectivity.
NOTE: The control panels that are suitable for using with AutoGate Connect must also be
equipped with LongReach technology.
Radar Connect
AutoGate Connect
Figure 1: Connect System Overview
Page 4
Instruction Manual Connect AutoGate/ 2017 Version 0.4 (GSD-100548)