Table of Contents
Advertisement
SAFETY PRECAUTIONS
Operation continued
Never operate the machine with defective guards, or without
safety devices, for example defl ectors and/or grass bag in place.
Do not change the engine governor settings or overspeed the
engine.
Start the engine carefully, with feet well away from the
cutterblade before starting the engine.
Do not tilt the mower when starting the engine.
Do not start the engine if standing in front of the discharge chute.
Do not put hands or feet near or under rotating parts.
Never pick up, carry the mower or lift the rear defl ector whilst
the engine is running.
Never touch the exhaust/exhaust guard or cooling fi ns when the
engine is hot.
THE CUTTERBLADE CAN CONTINUE TO ROTATE
AFTER THE MACHINE IS SWITCHED OFF.
Stop the engine and disconnect the spark plug lead:
•
Before clearing blockages or unclogging the discharge
chute;
•
Before cleaning / checking or working on the machine;
•
After striking a foreign object. Inspect the machine for
damage and ensure necessary repairs are made before re-
starting and operating;
•
If the machine starts to vibrate abnormally (check
immediately).
Stop the engine:
•
Whenever you leave the mower;
•
Before refuelling.
Lightning can cause severe injury or death. If lightning is seen
or thunder is heard in the area, do not operate the mower; seek
shelter.
Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the equipment
is in safe operating condition.
Frequently check fuel lines and fi ttings for cracks or leaks and
replace if necessary.
Inspect the exhaust periodically and replace if worn or leaking.
Check the rear defl ector and grassbag frequently for wear or
deterioration.
Replace worn or damaged parts for safety.
Wear strong work gloves when removing and reassembling the
cutterblade.
Never store the mower with petrol in the tank within an enclosed
area where fumes may reach an open fl ame or spark.
Allow the engine to cool before storing in any enclosure.
To reduce the fi re hazard, keep the engine and the surrounding
deck area free of grass, leaves or excessive grease.
If the fuel tank has to be drained, this should be done outdoors
and when the engine is cool.
Transporting
Use care when loading or unloading the machine into a trailer
or a truck.
7
Use full-width ramps for loading the machine into a trailer or a
truck.
Tie the machine down securely using straps, chains, cable, or
ropes. Both the front and the rear straps should be directed down
and outward from the machine.
Spare Parts
Below is a list of parts that can affect the Health & Safety of the
Operator:
•
Blade
•
Grassbag
•
Rear Defl ector
•
OPC (Engine Stop) Cable
•
Warning Decals
•
Owners Handbook
For Spare Part Numbers, please refer to the Hayter Parts List.
Hide quick links:
Advertisement
Table of Contents
