Setup And Programming; Programming The Controller; Making Adjustments - Hunter Solar Sync Owner's Manual

Setup and Programming

Programming the Controller

Program your Hunter controller as specified in the
Owner's Manual. When setting station run times, enter
the time that would normally be programmed during the
peak summer watering season. The Solar Sync is designed
to adjust all run times daily based upon on-site weather
conditions. This is done through the seasonal adjustment
feature on your controller. We recommend that all
programming be conducted with the controller seasonal
adjustment set at 100%.
Note
Set station run times for peak summer watering
with seasonal adjustment set at 100%.
16

Making Adjustments

After programming the controller to use Solar Sync,
it is recommended that you leave it alone for a few days to
gather sun and temperature data. If necessary, there are
two ways to make adjustments:
• If you find an individual zone is wetter or drier than the
rest of the site, simply increase or decrease the amount
of run time entered in the controller for that station.
• When making adjustments to program run times,
make sure to reset the seasonal adjust valve to 100%.
Solar Sync will make the appropriate adjustment
automatically based on measured weather conditions.
• If your landscape is wetter or drier than it should be,
use the controller to increase or decrease run times.