Front Sealing - Honeywell enCore FC1 Instructions For Use Manual

2 Front Sealing

Figure 7: FC1 device sealing, front view (1/3 housing width),
exemplary for Honeywell design (same for Elster design)

Security switch (sealable)

Seal screw

Wire and seal

Securing mark (adhesive label), securing a housing screw

Location of type plate part 1

Location of type plate part 2

Securing mark (adhesive label), securing the type plate parts
The front sealing of a device with a wide housing (1/2 housing width) is the
same (cf. Figure 7): Wire and seal for securing the security switch
DOCUMENT: FC1: MARKINGS AND DEVICE SEALING

,
PAGE: 7 OF 12