August 2018
Key of the Wireless Gateway and other devices in the network. If the Network ID
and Join Key are not identical, the Rosemount 928 Transmitter will not
communicate with the network. The Network ID and Join Key may be obtained
from the Wireless Gateway on the Setup>Network >Settings page on the web
server.
Note
The amount of time required to join the new device or devices to the network is
dependent upon the number of devices being joined and the number of devices in the
current network. One new device joining an existing network with multiple devices may
take up to five minutes. Multiple new devices joining an existing network may take up to
60 minutes.
Joining a wireless network using Field Communicator
1. On the Guided Setup screen, select Join to Network.
2. On the Join to Network screen, use the numeric keypad to enter the
WirelessHART
Gateway Network ID. Refer to the System Settings> Network > Network
Settings page in the Wireless Gateway web-based user interface for the
Network ID.
®
Network ID. The Network ID must match the Wireless
Quick Start Guide
17